Ultima Swimming Pool Matting, 9mm thick
Ultima swimming pool matting
Ultima swimming pool matting is perfectly suited for the leisure industry where the potential of slipping on wet floors is likely. Ultima offers a cost effective way to avoid accidents and reduce costly claims. Ideal for all wet areas including, swimming pools, showers areas, changing rooms and other areas regularly exposed to water. The curved design allows water to easily drain off, providing a slip resistant , safe and dry surface.
Ultima anti-slip matting is also warm and comfortable under foot. Ideal for large area coverage or long lengths. Ultima is treated with anti-microbial additive for protection against the growth of mould, mildew, fungi and odour causing germs. Ultima is designed to prevent the development and growth of bacteria and it resists body oils and general chemicals.
The matting design features built-in connectors for connecting lengths end-to-end. We supply separate connectors for connecting lengths side-by-side or at right-angles. (Please click on the 'Accessories' tab above this text for details).
- Reduced risk of slip injury
- Indoor or outdoor use
- Interlocking design - ideal for large areas
- 3 colour options
- 100% Recyclable PE
- Anti-microbial additive to prevent moulds and mildews
See our full range of Anti-Slip Matting.
- UV resistant
- Surface type
- Open grid
Please could you send me the cleaning specification for this matting. Thank you
Good Afternoon. The cleaning guidelines are as follows:
The frequency of cleaning will depend on traffic volume. The greater the amount of traffic, the stricter the cleaning regime should be. As a
general rule wet area matting should be cleaned weekly in heavy traffic areas. Sweep or wet-mop the top surface of the matting regularly. If needed, mop or flush service area. Remove matting from service area if there is no drainage in area. If necessary, hose down the matting with a garden hose or spray down with high pressure washer and place matting back into service.
Hi, we are installing a hot tub on a slate patio area. We need matting from hot tub steps to house entrance. What product would you recommend given slate is quite slippery when wet?
Hi and thanks for your enquiry. Heronrib matting has the best traction between the underside of the matting and the floor, and it's also anti-microbial so that would be the best option in this case. Heronrib can be found on this page: https://www.duratex.co.uk/anti-slip-matting/103-heronrib-swimming-pool-matting.html
Hi - can the matting be cut easily. We need a number of meters but it is two cm wider than we need ?
Hello and thank you for your enquiry. It is possible to cut these mats by hand using a stanley knife, but it's not very easy as the material itself is quite tough. A similar matting which is easier to cut by hand is the Floorline matting which can be found on this page: https://www.duratex.co.uk/anti-slip-matting/100-floorline-matting.html
do you have to buy the connectors separately or do the 5m lengths of matting come with them?
Hi. The 5m lengths come with built-in connectors, which allow the lengths to be connected end-to-end. Connectors may be purchased separately which allow the lengths to be connected side-by-side or at right-angles. I hope this helps, please don't hesitate to email us for any further assistance.
What size is the gap between the surface plains? also will it support lightweight outdoor plastic furniture?
The gap is 5mm though the edges are rounded so it opens up to approx 8mm at the surface. I expect that depressions would form under chair and table legs before too long, so I wouldn't recommend it.
Please enter the area to calculate the quantity required
Customers who bought this product also bought:
16 other products in the same category:
Recent Blog Posts
Our new safety products in response to the COVID-19 coronavirus outbreak