Plastic Permeable Paving Grids, 40mm thick
Permeable Ground Reinforcement Paving Grids
The permeable paving grid is a modular paving solution offering a cost-effective and practical solution for reinforcing unstable ground. The product is Sustainable Drainage System (SUDS) compliant allowing unimpeded permeation of surface water through its open-grid design.
A variety of infill materials can be used including gravel, soil, chippings, rubber crumb and many more. The grid has been designed to encourage healthy grass growth whilst protecting roots.
The role of the paving grid is to transfer loads from the surface to a pourous base course underneath, and to provide a stable and even ground surface which facilitates natural drainage. This can lead to significant cost-savings over traditional drainage systems on non-pourous ground surfaces.
The design allows for thermal expansion to occur within the curved walls of the grid, thus reducing thermal expansion in the overall dimensions which can lead to grids popping out of the ground. This is a common issue with plastic paving grids based on straight line grids on particularly hot days.
- Made from 95-100% recycled HDPE (high density polyethylene)
- Fully recyclable
- Resistant to acids, oils, fuel, strewing salt and ammonia
- UV and weather resistant
- Load bearing capacity of 250-320 tonne per sqm (on well compacted sub-base)
- Available in Black, Green (for grass) and White (for gravel)
Due to the recycled nature of this product, the colour/tone of each batch will vary slightly.
- Temporary or permanent road ways
- Car parks (green parking)
- Green roofs
- Shed bases
- River/pond embankments
- Field entrances and walkways
- Caravan parking
- Unstable boggy ground
- HDPE (Recycled)
- Temperature resistance
- -50°C to 90°C
- UV resistant
- Chemical, oil and acid resistant
- Surface type
- Open grid
- Compressive strength
- 2500 Kn / m2 (filled)
I am looking for a product to run a caravan jockey wheel over a grass area to stop it sinking in when manoeuvring. The main wheels run on concrete. Is this suitable?
Hi and thanks for your enquiry. These would work but probably a bit overkill. Customers have had success using our 23mm thick grass mats for this purpose, please see this page for details: https://www.duratex.co.uk/rubber-matting/46-rubber-grass-mat-23mm-thick.html. One of the product reviews mentions use with a caravan jockey wheel. I hope this helps.
I am part of a small community group wyhich runs small events on a grassy area which can sometimes get muddy. I'm looking for a product to provide temporary paving (our events last a few hours) in such conditions. Are the "Plastic Permeable Paving Grids, 40mm thick" suitable for this type of event?
The permeable paving grids aren't really suitable as a temporary surface, as they require a carefully prepared sub-base. If they are installed on an uneven surface, the grids will lift in places and create trip hazards.
A more suitable temporary non slip surface for grassy areas would be the Rubber Grass Mats (RM/1020).
Would this be suitable for the base of a 4.5m X 7.5m log cabin.
These can be used as shed bases, but a log cabin would probably require a more substantial foundation.
I would like to use the grids in a gateway in a horses field and around their water troughs in the field ,would they be suitable ? The ground is dry at the moment do you have to prepare the ground or if its level can you put them straight on.The mud can be as deep as 6in or more in winter.
Hi there. A sub-base is required, please see the 'Downloads' tab on the product page for the installation guides. There is a soil assessment guide included which will help determine the required sub-base thickness.
Can this be used to construct a downward sloping drive, will it hold gravel in place.
The maximum slope for vehicle use would be 12% (1:8), and it is recommend to peg/stake the grids to the ground. Angular gravel is recommended above rounded 'pea gravel' varieties. Edging boards and kerbs are also recommended to aid gravel retention. After the first fill, a vibrator/compactor plate can be used prior to topping up with a second fill. However it may still be necessary to continue to top up the cells from time to time depending on the angle of the slope and the amount of traffic.